The Forum is a free service, and much like the "free" content on Public Radio, we hope you will support WoodenBoat by subscribing to this fabulous magazine. To get WoodenBoat delivered to your door or computer, mobile device of choice, etc, click WB Subscriptions. If this is your first visit, be sure to check out the FAQ.
Bent oak looks exotic, and seems to defy nature. You can bend oak into almost any shape you want without steaming it. Woodworkers know a trick that involves cutting the oak into thin pieces first, then gluing them around a form to bend them.
E-Mail us and let us know what you think. Be sure to review our Frequently Asked Questions page. Contact us to discuss advertising or to report problems with this site.
Moderator: Bill Edmundson. Privacy Terms. Quick links.
Although most projects involving wood use straight boards, some require bent wood. Bent wood can add uniqueness and flair to a project. There are several different methods that can be used, each with its advantages and disadvantages.
I challenge anyone to document a mistake different from all the boo-boo's that I have made so far. All I wanted to do was to make a replacement sled runner or "ski" for a small firewood-carrying sled. The owner brought me the broken off tip of the bad runner and also the still-intact runner from the other side of the sled.
If you only need to bend wood for a one-time project, laminating the wood is the least labor-intensive option. Steaming the wood to make it flexible gives you stronger curves, but the process requires a fair amount of set up. Finally, kerfing is a quick approach that only requires a saw, but the result is too weak to use in many projects.
And steam bending creates attractive curved parts. Every wood species, and even individual workpieces of the same species, can react differently to steam bending. Start with these best practices and then let experience be your guide. Keep notes on species, thickness, bend radius, and steaming time, and always bend at least one more part than you need.